RSS

Tag Archives: MooseKnuckle Lanyards

Limited Edition OD Green Carbon Fiber Lanyard

The Limited Edition OD Greed Carbon Fiber Lanyard is now available… if interested contact one of of dealers to place your order.  This would make a great gift for a veteran or anyone into retro military gear.

MooseKnuckle Lanyards

Limited Edition OD Green Carbon Fiber Lanyard

 
Leave a comment

Posted by on February 25, 2012 in Gear

 

Tags: , , , ,

The winner of the “What do you have on your fishing lanyard?” giveaway is….

Chris Schatte…. congratulations to Chris!

Chris will receive a MooseKnuckle Lanyards Universal Tippet Caddy

MooseKnuckle Lanyards Universal Tippet Caddy ™

 
3 Comments

Posted by on December 2, 2011 in Giveaways

 

Tags: , , , , ,

What do you have on your fishing lanyard?

After a short period of paying particular attention to the equipment or tools that people put on their lanyards it does not take long to realize that lanyards and the tools they carry are as unique as the user.  We all have our favorite piece of equipment and tools we will never dare enter the water without.  While a few seem to carry the kitchen sink on their lanyards.  I would consider my lanyard to be simple, with the exception of one luxury item.  My lanyard carries a pair of Able Nippers, Orvis Forceps with scissors, a Ty-Rite, and our Universal Tippet Caddy ™.

My simple, yet effective Stainless Steel Lanyard.

The Abel Nippers were a gift from the wife, hands down the best nippers I have used thus far.  They make quick work of anything up to 100lb braided line.  I accidentally purchased the Orvis Forceps with scissors while looking for forceps with a split shot jaw, really had no use for the scissors at the time.  But since then, the scissor portion has been used far more often than the split shot jaws.  I use the scissors to trim everything from line to indicators and flies.  Of course the Universal Tippet Caddy ™ is a must, between breaking off on snags and changing flies I reach for tippet more frequently than the forceps.  Last but not least, my Ty-Rite.  Yeah I know what your thinking, but honestly it saves me more time on the water than you can imagine.  Since most of my fishing is done dead of winter, frozen numb fingers makes it a challenge to tie size 20 and smaller midges.  Now that you have an idea about what I have on my lanyard lets take a look at a few others.

Pro-Staff member Dave Hise with his Carbon Fiber Lanyard

As you can see from the picture above pro-staff member Dave Hise carries the basics of nippers, nail knot tool, forceps (not pictured), and our Universal Tippet Caddy ™.  The most notable difference in Dave’s configuration is the addition of magnetic tool releases. As basic as this seems Ryan Dunne takes the cake on simplicity.

Pro-Staff member Ryan Dunne with the most basic of Stainless Steel Lanyards.

Pro-Staff member Ryan Dunne practices the K.I.S.S. (Keep It Simple Stupid) theory with his lanyard.  Ryan merely carries our Universal Tippet Caddy ™, nippers, and floatant while fishing from a boat.  On the complete opposite end of the spectrum, Nick Garlock puts his Stainless Steel Lanyard to work!

Pro-Staff Member Nick Garlock's fully loaded Stainless Steel Lanyard.

Recall that I said some people carry the kitchen sink on their lanyards, if you look closely at the picture above you can actually see the kitchen sink on Pro-Staff Member Nick Garlock’s Stainless Steel Lanyard.  From what I can tell it appears that Nick carries a couple bottles of floatant, a fly dryer / leader straightener, nippers, a nail knot tool, Kethcum Release, and of course our Universal Tippet Caddy ™ even while in a boat.  Pictured below are examples of what Pro-Staff Member Derek Young and John Dollar carry on their MooseKnuckle Lanyards.

Pro-Staff member Derek Young with a nice Cutthroat while using just the basics on his Stainless Steel Lanyard.

John Dollars' prototype MooseKnuckle Lanyard during field testing.

As the title indicates, what do you have on your fly fishing lanyard?  By simply subscribing to our blog, liking our Facebook page or following us on Twitter, and posting a comment below that answers the question, “What do or would you have on your fishing lanyard?” you will be entered in a random drawing for the very first giveaway of a MooseKnuckle Lanyards Universal Tippet Caddy ™ to be held December 1st.  (Only those who complete all three requirements will be be eligible to win.  Be sure to include either your Facebook or Twitter name in your post)

 
19 Comments

Posted by on October 22, 2011 in Fishing, Gear, Giveaways

 

Tags: , , , , , ,

Big Cedar River Fly Fishing Report 10.10.2011

Like most days when I get a chance to head to Virginia to do some fishing this one started out with the alarming going off at 0330.  While stammering around looking for the remaining gear to toss in the truck, barely able to keep my eyes open from the lack of sleep, the thought of crawling back into bed crossed my mind.  Not because I didn’t want to go fishing, but simply because sleep was becoming more and more valuable.  After all, this was my fourth day in a row of being up while the clock was still in the 0300 hour.  But today was going to be little different from my other trips to Virginia.  Well not a little, a lot different actually.  This day would be the first day I was headed out to exclusively introduce someone to fly fishing without actually getting to fish myself.  Having finished getting dressed and gathering gear I headed out the door to load up the truck.  My first breath of the cool morning made me pause in my tracks.  It is going to be a great day of fishing I thought to myself.  Still standing there taking in the cool start to the day I thought about how excited I was the first time I went fly fishing.  Realizing there were two people that were having those same feelings this morning made me realize sleep is highly overrated, we have fish to catch!

Corey looking forward to the first fish on a fly rod.

In my stammer I didn’t bother to make coffee as I knew I’d be passing Starbucks on my way to the shop.  But of course, like every other time I stop this early, Starbucks was still closed.  They should really reconsider their hours.  I was safe though, I knew Dave would need to stop for coffee too.  Arriving at Casters Fly Shop I discovered that I was the last of the four to arrive.  The two that were fishing, Julie and Corey appeared to be eager to hit the road.  After a brief stop at Starbucks from a cup of java we hit highway 321 north towards Boone.  With only an hour left in the trip the pre-cast briefing started, do this don’t do that type of thing.  While it sounds easy without a rod in your hand putting it to practice your first time isn’t so easy.

Julie working over a large slow moving pool. She pulled five trout all together from this hole.

Arriving at the waters edge I could sense the excitement of the lucky two that for one would soon try his hand at fly fishing for the first time and for the other face trout the size of the ones in Big Cedar.  Needless to say, it didn’t take long for them to get geared up and headed to the water.  My first observation of the water was low, slow, and gin clear.  This may not be the best of combinations for first timers.

Didn’t take long before the trout showed their lack of concern for the water conditions.

Julie and Dave Hise showing off only her third trout ever caught.

Corey, who happens to be the engineering brains behind MooseKnuckle Lanyards Universal Tippet Caddy ™, was not to be outdone.  He hooked up with his first fish on a fly rod soon after.

Corey with his first fish on a fly rod!

They continued to catch fish all morning until they worked up a good appetite.  The fish ranged from two to three pounds and Corey hooked a couple that would have likely went five or six, but instead landing them he learned to very valuable lessons.  First, know how much further you can reel before the leaders enters the first guide.  If you reel the leader into the first guide and the fish runs it is likely never to be seen again.  Well maybe not that extreme, but the chance of the fish breaking off increases ten fold.  Secondly, if you get a big fish on and it runs, stay off the reel.  Right Corey?  So much as a mere brush up against the reel could create plenty of drag to allow the fish to break off, especially if the reel is singing. As always, Dave put on an amazing stream side lunch that would make most five star chefs envious.

A stream side lunch fit for kings, sorry the minestrone did not stick around to be photographed.

Fishing was even better following lunch with one hole producing easily ten to fifteen fish between the two.  Julie’s confidence using Squirmy Wormie was to the point she was pointing out fish in the pool that she specifically wanted to catch.

Post kiss picture, was just a second to late with the release.

With all the fish being landed Corey and Julie were compelled to show their gratitude with a planting of the lips.

Corey shows his appreciation.

At the end of the day I realized why guides guide.  Fueling the excitement of Corey and Julie by hooking them up with fish was enough to make me want to do it all over again soon.

Big Cedar

 
1 Comment

Posted by on October 16, 2011 in Fishing, Trip Report

 

Tags: , , ,

Fishing Lanyard during Fall and Winter Months?

Of course, fishing lanyards are perfect for fall and winter fishing too.  While wearing a jacket you have plenty of pockets for storage of fly boxes and other gear you think need.  Simply place your nippers, hemostats, and anything else you want at your finger tips on your MooseKnuckle Lanyard and you are ready for a comfortable, successful day on the water.

Pro-Staff Member Dave Hise wearing his MooseKnuckle Lanyard during a cool fall day on the water.

 
2 Comments

Posted by on October 5, 2011 in Gear

 

Tags: , , , ,

Clear Cure Goo

The way I stumbled across Clear Cure Goo wasn’t even related to fly tying, or fishing for that matter.  I was actually searching for an epoxy to use for a physics project that would cure virtually instantly to use in attaching my “fins” to the water bottle.  Yes, a physics project.  Probably the most basic of physics projects, but still a physics project.  It was the 2 liter bottle water rocket project that most people do in their first physics class. Needless to say I ordered a Clear Cure Goo Kit from Brian.

The rocket actually took on a very different design from other rockets.  Instead of using traditional fins, that people would recognize, I used a ring fin design.  The most difficult aspect of constructing a rocket is attaching the fins.  It is critical to maintain alignment while the adhesive set in order to ensure stable flight.  That’s why Clear Cure Goo worked so well, within seconds of hitting the Goo with the UV Light it was set, and the fins weren’t moving.  It goes without saying “The Ringer” rocket won!

Since Clear Cure Goo worked so well for the rocket construction I couldn’t wait to try it out on some flies.  The first flies I tied using Clear Cure Goo were hard body ants, much like the one in the video below. I have since tied a handful of patterns using Clear Cure Goo.  It was a no brainer when I started sourcing materials for the assembly of MooseKnuckle Lanyards.  I needed an epoxy for a few different applications in the manufacturing of the fishing lanyard.  The first place I headed was my tying table, Clear Cure Goo!  Not only did Clear Cure Goo work perfectly for what I needed, but Brian was a tremendous help.  Clear Cure Goo has performed flawless in every application I have used it for.  Lucky for us Brian has several different variations of the Goo available, everything from Thick, Thin, Brushable, Flex, Fleck, to Hydro.

 
Leave a comment

Posted by on September 19, 2011 in Fly Tying

 

Tags: , , , , , ,

 
%d bloggers like this: